Recently viewed products

• 

  Quick View

  Monic Henley Clear Phantom Tip Line

  €89.00

  Monic Henley Clear Phantom Tip Line
  SKU: NFD350

  Weight Forward Floating 5-12 Wt

  Freshwater & Saltwater

  Taper: Traditional

  Core: MoniCORE Proprietary Monofilament

  Ideal Temp Range: +7C & above

  Weight: Half-Size Above AFFTA Standard (see weight chart below)

  Loops: Reinforced Welded Loops on Both Ends

  Head Length: 10,7m
  Breaking strength: 30lb
  Head Weight:
  #5  13,9g
  #6  15,2g
  #7  18,1g
  #8  20,4g
  #9  22,7g
  #10 29,7g
  #11 31,1g
  #12 33,0g

  Select options
• 

  Quick View

  Iwana Special Reel Feet for Vintage Rods

  €59.00

  Iwana Special Reel Feet for Vintage Rods
  SKU: NFD9282

  • For each order, we offer two sizes. One is shorter and thinner than IWANA’s standard reel foot, and the other is shortest and thinnest.
  • In our tests, they perfectly match most vintage fly rods.
  • We provide additional screws for replacement.
  • This reel foot can only be used on the IWANA reel.
  • The thinnest reel foot is very thin to allow for extreme conditions. Do not lock or squeeze with excessive force as it may cause deformation.

   

  Add to cart
• 

  Quick View

  Zen Tenkara Rod Tie Downs

  €11.90

  Zen Tenkara Rod Tie Downs
  SKU: NFD9287

  • Holds up to 4 standard tenkara rod tubes or 9 in sock only
  • Holds up to 4 standard fly rods out of hard tubes
  • Bundles multiple rods to keep them safe and together
  • Tightens and loosen with one hand
  • Perfect for cyclists, motorcyclists, hikers, campers, kayakers and rafters
  • Allows you to strap down your rods in a fast and easy way
  • 4 mm high density foam prevents scratches on fishing rods
  • They float if they fall in the water

  Add to cart
• 

  Quick View

  Dr. Slick Cyclone Nipper NATC / NATCO Gold and Green Aluminum Frame

  €30.90

  Dr. Slick Cyclone Nipper NATC / NATCO Gold and Green Aluminum Frame
  SKU: NFD9324

  Cyclone Nippers
  Cutting edge nippers for the new age tippet materials. Super sharp Tungsten Carbide blades are
  mounted on a lightweight 6061-T6 anodized aluminum frame and make short work of most, if not
  all, tippet material from braid up to 20lb coated wire.
  Available in straight or offset cutting face and both units come with replacement T.C. cutters,
  screws, hex key, and a steel retention ring.

  Length: 57mm
  Weight: 22gram

  Select options
• 

  Quick View

  Monic Microslick Dry Fly Floatant

  €9.90

  Monic Microslick Dry Fly Floatant
  SKU: NFD425

  Dry Fly Liquid Floatant

  Temperature Stable

  Won’t change viscosity

  Masks human odor

  Add to cart
• 

  Quick View

  Galvan The Grip Reels

  €739.00 – €999.00

  Galvan The Grip Reels
  SKU: NFD9316

  The Grip is the Saltwater dedicated reel from Galvan (California, USA) which is, like all Galvan reels manufactured in America!

  Grip fly reels are designed for those that desire a fully sealed drag system for the most extreme conditions. They have the same heavy duty, clean cut construction that Torque and Rush series reels have become known for, only with a few sweet additions.

  To start, 2 Hybrid ceramic ball bearings and even more carbon fiber have been incorporated, adding to the silky smooth drag that all Galvan users are accustomed to. A watertight, easy to access hub has also been added encasing the entire drag system, leaving only anodized aluminum exposed to the elements. The new quick turn knob allows for a super quick spool release as well as easy access to the Drag System, and the Monster grip handle provides assured accessibility.

  Included Galvan Technologies:

  6061
  EZ Grip
  L.A.D.
  low – COF
  Maximum Porting
  microTune
  Water Lock Hub
  PBR
  Torque Drag System
  TruBalance
  T²
  ЯRetrieve

  Available in Black, Clear, Green, Blue, Burnt-Orange colours
  Available in sizes 5,6,7,8, 10 and 12 and with these reel diameters and weights:

  Grip Model	Size	Diameter in inches	Weight in grams
  The Grip G-5	5	3,50	172
  The Grip G-6	6	3,75	179
  The Grip G-7	7	3,88	189
  The Grip G-8	8	4,00	232
  The Grip G-10	10	4,25	247
  The Grip G-12	12	4,50	269

  Select options
• 

  Quick View

  Oros Strike Indicator 3 on card

  €13.90

  Oros Strike Indicator 3 on card
  SKU: NFD9214

  3-Packs with:
  Orange – White (or Red/White) – Pink
  or
  Chartreuse – White (or Red/White) – Orange (“COW”)

  Cards available with the following indicator sizes:
  Just X-Small
  Just Small
  Just Medium
  Just Large
  One Small Orange + One Medium Pink + One Large Red/White or White
  One X-Small Chartreuse + One Small Red/White or White + One Medium Orange

  SKU	Size(s)	Colour 1	Colour 2	Colour 3
  NFD9214-3X-smallmixed	X-Small	Orange	White or White/Red	Pink
  NFD9214-3X-smallcow	X-Small	Chartreuse	White or White/Red	Orange
  NFD9214-3smallmixed	Small	Orange	White or White/Red	Pink
  NFD9214-3smallcow	Small	Chartreuse	White or White/Red	Orange
  NFD9214-3mediummixed	Medium	Orange	White or White/Red	Pink
  NFD9214-3mediumcow	Medium	Chartreuse	White or White/Red	Orange
  NFD9214-3largemixed	Large	Orange	White or White/Red	Pink
  NFD9214-3largecow	Large	Chartreuse	White or White/Red	Orange
  NFD9214-3smlmixed	Small + Medium + Large	Orange	Pink	White or White/Red
  NFD9214-3XsSM	X-Small + Small + Medium	Chartreuse	White or White/Red	Orange

   

   

  Easy to use!
  
  To fasten:
  1. Unscrew top
  2. Place line in screw slot
  3. Screw on top until the screw and nut grips the line
  4. Unscrew ¼ turn to adjust up or down
  5. Don’t over-tighten.

   

  Features and details:
  • Recommended line weights by size: small – 5X and lower, medium – 4X or lower, large –
  3X or lower
  • Does not kink the line
  • Float as much or more weight than the current leading brands.
  • Smooth surface developed to repel water and dirt, and create less drag while casting
  • Made with a Biodegradable additive that accelerates biodegradation with prolonged
  exposure in natural environments, not in normal use
  • Strike indicator top and bottom colors can be mixed or matched by anglers for optimal
  visibility

  Sizes:
  X-Small   10mm dia
  Small       16mm dia
  Medium  21mm dia
  Large      26mm dia

  Select options
• 

  Quick View

  Galvan G.E.N Weight Kit

  €25.90

  Galvan G.E.N Weight Kit
  SKU: NFD9351

  The G.E.N Weight Kit is a 1/2 ounce brass washer that fits into the spool of the G.E.N reels, allowing the angler to increase the weight of the reel by a 1/2 ounce. A rubber gasket is recessed into a groove in the washer’s hole ensuring a snug fit on the spindle. A threaded hole in the weight allows for easy removal of the weight from a reel using the included weight removal tool. (See instructions here) G.E.N Weight Kits come with one 1/2 ounce weight and includes the weight removal tool.

  Add to cart