Sunshine Nylon Tippet
€3.99
Sunshine Nylon Tippet
SKU: NFD9114
Nylon tippet material on 30m spools
Diameter | 0X, 1X, 2X, 3X, 4X, 5X, 6X, 7X |
---|
Recently viewed products
-
Iwana Special Reel Feet for Vintage Rods
€59.00Add to cartIwana Special Reel Feet for Vintage Rods
SKU: NFD9282- For each order, we offer two sizes. One is shorter and thinner than IWANA’s standard reel foot, and the other is shortest and thinnest.
- In our tests, they perfectly match most vintage fly rods.
- We provide additional screws for replacement.
- This reel foot can only be used on the IWANA reel.
- The thinnest reel foot is very thin to allow for extreme conditions. Do not lock or squeeze with excessive force as it may cause deformation.
-
Monic Henley Clear Float Line
€89.00Select optionsMonic Henley Clear Float Line
SKU: NFD342All line from MONIC are free of PVC!
The Henley Clear Float line has an traditional tapering making it an allround line.
The full line is clear and is ideal for targeting spooky fish in gin clear streams!
Weights from #5-12
Freshwater & Saltwater
Taper: Traditional
Core: MoniCORE Proprietary Monofilament
Ideal Temp Range: +7C and above
Weight: Half-Size Above AFFTA Standard
Loops: Reinforced Welded Loops on Both Ends
Head Length: 10,7m
Breaking strength: 30lb
Head Weight:
#5 13,9g
#6 15,2g
#7 18,1g
#8 20,4g
#9 22,7g
#10 29,7g
#11 31,1g
#12 33,0g -
Monic Henley Clear Phantom Tip Line
€89.00Select optionsMonic Henley Clear Phantom Tip Line
SKU: NFD350Weight Forward Floating 5-12 Wt
Freshwater & Saltwater
Taper: Traditional
Core: MoniCORE Proprietary Monofilament
Ideal Temp Range: +7C & above
Weight: Half-Size Above AFFTA Standard (see weight chart below)
Loops: Reinforced Welded Loops on Both Ends
Head Length: 10,7m
Breaking strength: 30lb
Head Weight:
#5 13,9g
#6 15,2g
#7 18,1g
#8 20,4g
#9 22,7g
#10 29,7g
#11 31,1g
#12 33,0g -
Dr. Slick Cyclone Nipper NATC / NATCO Gold and Green Aluminum Frame
€30.90Select optionsDr. Slick Cyclone Nipper NATC / NATCO Gold and Green Aluminum Frame
SKU: NFD9324Cyclone Nippers
Cutting edge nippers for the new age tippet materials. Super sharp Tungsten Carbide blades are
mounted on a lightweight 6061-T6 anodized aluminum frame and make short work of most, if not
all, tippet material from braid up to 20lb coated wire.
Available in straight or offset cutting face and both units come with replacement T.C. cutters,
screws, hex key, and a steel retention ring.Length: 57mm
Weight: 22gram -
Galvan The Grip Reels
€739.00 – €999.00Select optionsGalvan The Grip Reels
SKU: NFD9316The Grip is the Saltwater dedicated reel from Galvan (California, USA) which is, like all Galvan reels manufactured in America!
Grip fly reels are designed for those that desire a fully sealed drag system for the most extreme conditions. They have the same heavy duty, clean cut construction that Torque and Rush series reels have become known for, only with a few sweet additions.
To start, 2 Hybrid ceramic ball bearings and even more carbon fiber have been incorporated, adding to the silky smooth drag that all Galvan users are accustomed to. A watertight, easy to access hub has also been added encasing the entire drag system, leaving only anodized aluminum exposed to the elements. The new quick turn knob allows for a super quick spool release as well as easy access to the Drag System, and the Monster grip handle provides assured accessibility.
Included Galvan Technologies:
6061
EZ Grip
L.A.D.
low – COF
Maximum Porting
microTune
Water Lock Hub
PBR
Torque Drag System
TruBalance
T²
ЯRetrieveAvailable in Black, Clear, Green, Blue, Burnt-Orange colours
Available in sizes 5,6,7,8, 10 and 12 and with these reel diameters and weights:Grip Model Size Diameter in inches Weight in grams The Grip G-5 5 3,50 172 The Grip G-6 6 3,75 179 The Grip G-7 7 3,88 189 The Grip G-8 8 4,00 232 The Grip G-10 10 4,25 247 The Grip G-12 12 4,50 269 -
Galvan G.E.N Weight Kit
€25.90Add to cartGalvan G.E.N Weight Kit
SKU: NFD9351The G.E.N Weight Kit is a 1/2 ounce brass washer that fits into the spool of the G.E.N reels, allowing the angler to increase the weight of the reel by a 1/2 ounce. A rubber gasket is recessed into a groove in the washer’s hole ensuring a snug fit on the spindle. A threaded hole in the weight allows for easy removal of the weight from a reel using the included weight removal tool. (See instructions here) G.E.N Weight Kits come with one 1/2 ounce weight and includes the weight removal tool.
-
Umpqua ZS2 Overlook 500 Chest Pack/Kit Olive
€239.00Add to cartUmpqua ZS2 Overlook 500 Chest Pack/Kit Olive
SKU: NFD9359Neck strain and visibility are always a compromise with chest packs. The Overlook resolves both with a 4-point harness attachment and sleek, tapered face. And, with this kit, you can choose from two back options, a flat mesh back and a full 550 cubic inch (9Litre) back with net holster. And, all of the great ZeroSweep™ features come along for the ride. Two ZeroSweep™ retractor stations (great for nipper and floatant attachment), ambidextrous hemostat station, foam fly patch and tippet holder cover all your key accessories. ZS2 version now includes a molle modular attachment station allowing integration with ZS2 accessories. Two stretch mesh pockets round out the storage possibilities.
Features:
• 4-Point harness attachment for all-day comfort
• 2 x ZS™ Retractor Stations – with hypalon attachment bands
• 2 x ZS™ Hemostat Grab Tabs – ambidextrous
• 1 x ZS™ Foam Fly Patch Station – includes foam fly patch
• 1 x ZS™ Cord Tippet Holder – “Stowable” when not in use
• 1 x Molle Modular Attachment Station – compatible with the following ZS2 accessories (sold separately):
1. ZS2 Foam Fly Patch
2. ZS2 Gel Floatant Holder
3. ZS2 Shimi Shake Floatant Holder
4. ZS2 Tippet Holder
5. ZS2 Water Bottle Holder
• Closed-foot zipper sliders (minimize line-snag)
• YKK Zippers