European Distributor of High Quality Fly Fishing Products

Dr. Slick Glass Bobbin, 3″, Dual Glass Inserts, Delrin Feet – GBOB3

12.90

Dr. Slick Glass Bobbin, 3″, Dual Glass Inserts, Delrin Feet – GBOB3
SKU: NFD658-GBOB3

  • Stainless Steel & Brass Finish
  • Dual Glass Inserts
  • Delrin Feet

9 in stock (can be backordered)

Information Table
Price in SEK (Incl. MOMS) 159 kr

Bobbins are the critical tool in tying since they must keep smooth tension on the thread spool and have super smooth inserts to apply the thread to your fly. To this end, we have created three series of bobbins that handle these tasks with ease. All have delrin feet for smooth tension on the thread spool, and have either dual glass, ceramic or titanium oxide inserts for smooth application of thread to fly. These funnel shaped inserts allow for a smoother application of thread or other materials as the bobbin is rotated, and they cause less breakage than traditional pipe or straight edged inserts.

(Visited 81 times, 1 visits today)

Recently viewed products

  • Beulah Guide SII Rod 904
    SKU: NFD107

    Length: 9’0ft

    Line Weight: 4

    Action: Medium-Fast

    Sections: 4

    Weight: 73grams

    Add to cart
  • Wingo Fish Skin Gloves Freshwater 2022
    SKU: NFD9304

    • All Wingo Sun Protection products tested as UPF 50+.
    • Available in 3 patterns: Brown Trout, Brook Trout and Rainbow Trout
    • Packaged and sold as a pair of gloves
    • Lightweight, comfortable, quick-drying polyester to keep you protected from the elements
    • Padded palms to protect key abrasion points
    • Great for fishing and other outdoor/water sports
    Select options
  • Galvan G.E.N Weight Kit
    SKU: NFD9351

    The G.E.N Weight Kit is a 1/2 ounce brass washer that fits into the spool of the G.E.N reels, allowing the angler to increase the weight of the reel by a 1/2 ounce. A rubber gasket is recessed into a groove in the washer’s hole ensuring a snug fit on the spindle. A threaded hole in the weight allows for easy removal of the weight from a reel using the included weight removal tool. (See instructions here) G.E.N Weight Kits come with one 1/2 ounce weight and includes the weight removal tool.

    Add to cart
  • Zen Tenkara Level Line #3
    SKU: NFD9182

    • 100% High Quality, High Resilience Fluorocarbon
    • Dyed Hi-Vis Orange
    • 50 meter Spools
    • Ultralight and supple
    • Cut you your desired length
    • Most delicate line and presentation
    • Requires “flickier” wrist cast
    • Perfect for dries and traditional kebari pattern flies
    • Pairs best with Zen Suzume and Zako as well as other brands
    • Made in Japan
    Add to cart
  • Taylor Series-1 Reels
    SKU: NFD700

    Multiple standard colors (Slate Grey, Golden Olive, Ruby Red, Offshore Blue)

    – Watertight sealed drag system (salt-water safe)

    – Hard anodized exterior for both beauty and protection

    – Carbon-fiber drag system

    – Highly ported yet ridged frame design

    – Ultra large arbor design for fast retrieve and minimal line coil.

    – Cold-Forged and machined from aerospace 6061 T6 Aluminum

    – Reel clicks on both incoming and outgoing

    – Convertible to both left and right hand retrieve

    – Reels come in a tough neoprene case- Two-tone anodized reel frame

    Two sizes:

    wt4-6:  136 grams and 95mm diameter

    wt7-9:  147 grams and 106mm diameter (NFD recommends this one for wt 6-8)

    Select options
  • Iwana Special Reel Feet for Vintage Rods
    SKU: NFD9282

    • For each order, we offer two sizes. One is shorter and thinner than IWANA’s standard reel foot, and the other is shortest and thinnest.
    • In our tests, they perfectly match most vintage fly rods.
    • We provide additional screws for replacement.
    • This reel foot can only be used on the IWANA reel.
    • The thinnest reel foot is very thin to allow for extreme conditions. Do not lock or squeeze with excessive force as it may cause deformation.

     

    Add to cart
  • Taylor Revenge Reels
    SKU: NFD9318

    Latest and greatest from Taylor!
    A full frame reel for your shooting head (Scandi/Skagit) fishing. Or for your Euro Nymphing or Tropical Saltwater fishing.

    – Watertight sealed drag system (saltwater safe)

    – Hard anodized exterior for both beauty and protection

    – Multiple standard colors (Slate Grey, Golden Olive, Sunset Orange, Offshore Blue)

    – Multi-disc stacked drag system; drag settings from 15lbs+ to fine sensitivity.

    – Lightweight innovative carbon fiber frame

    – Full-frame for Euro style nymphing or Spey fishing

    – Ultra-large arbor design for fast retrieve and minimal line coil. 

    – Cold-Forged and machined from aerospace 6061 T6 Aluminum 

    – Reel clicks on both incoming and outgoing

    – Convertible to both left and right hand retrieve

    – Reels come in a tough cordura/neoprene case

    – Scaled drag system (small and lightweight on the smallest model… the larger the reel, the bigger and stronger the drag system)

     

    Available in three sizes:  #4-6,  #7-9 and #10plus
    Available in four colours:  Slate Grey, Golden Olive, Offshore Blue and Sunset Orange

    Model Size Diameter in inches Weight in grams
    Revenge 46  4-6 3,82 166
    Revenge 79  7-9 4,45 224
    Revenge 10plus  10-12 5,00 247
    Select options
  • Dr. Slick SNH5/6BW Black Widow Scissor Clamp, 5″ and 6”, Bent Shaft, Black and Red, Straight
    SKU: NFD9322

    Black Widow
    Scissor Clamp, Bent Shaft, Black and Red, Straight
    SNH5BW: 5 Inch
    SNH6BW: 6 Inch

    Select options
NFD