OnTheDropper Products
OnTheDropper Flyrod Mount for Bikes
€29.90OnTheDropper Flyrod Mount for Bikes
SKU: NFD9267
Taking your bicycle for fishing?
Then this product is for you!
The rod holder works just as well for spin / reel as a fly rod and keeps your rod in a secure grip so you can focus on the traffic.
You attach it to your bike with the supplied cable ties, suitable places are the bicycle basket or any place where the frame forms corners, for example at the rear wheel, under the saddle or at the handles.
OnTheDropper Rod Balancing Kit
€21.90OnTheDropper Rod Balancing Kit
SKU: NFD9256
A front heavy rod is no good!
To find a reel that give you the right balance can be expensive and seldom fully accurate. With this balancing kit you can easily achieve balance in the rod as you can change the weight very precisely with the help of discs that are hidden inside the balancer.
IMPORTANT: Before ordering, you must measure the diameter end of the reel seat so that it matches.
OnTheDropper Self Adjusting Lineclamp
€8.90OnTheDropper Self Adjusting Lineclamp
SKU: NFD9263
Do you like to walk around and carry fly line basket?
No, it is quite an obstacle!
An alternative is line clips of various kinds and you have probably seen more than one model before but this is a little different as it adjusts to how much or how thick the fly line is in the clip, this means that you do not need to screw it on to make it pinch with the right force.
The fact that it adjusts itself also means that you avoid the jerks that can occur when you shoot the line.
Sorry, only in Swedish lingo….
OnTheDropper MagneticMount for EcoCutter
€8.90OnTheDropper MagneticMount for EcoCutter
SKU: NFD9255
Here we have an improvement to the usual magnetic mounts for the EcoCutter, with this plate the magnets stay at the right distance, which makes it much easier to put it back in the right place when you use it.
These can be used for other things than just Ecocutters, you can mount them on fly boxes etc. etc.
OnTheDropper EcoCutter
€12.90OnTheDropper EcoCutter
SKU: NFD9254
Six reasons why you need an EcoCutter:
- Its the only leader/tippet cutter/mower which automatically collects the stumps.
- Its the only leader/tippet cutter/mower with reversible blades that you can turn 4 times before they are used up.
- Made to last a long time, you will be able to buy the blades even if the production of EcoCutter ceases or the like, you can be sure that you will not have a gadget lying around that you will not be able to use.
- The EcoCutter is made of ABS plastic which is flexible and durable.
- Its the only leader/tippet cutter/mower that “sharpens” the tip of the leader when it cuts off the leader.
- Its the only leader/tippet cutter/mower that has illuminated leader/tippet insert (activate light bar if necessary). You do not need to keep track of batteries or electronics that have been damaged by water, the lighting is there when you need it.
This product comes with a practical lanyard that you can have a lot of use of even if you will not use it for your EcoCutter. Accessories such as light bars / magnetic mounts / Velcro are sold separately.
OnTheDropper ClampMount
€10.90OnTheDropper ClampMount
SKU: NFD9265
Have you found the right place for your clamp/plier yet?
For the owner&product designer of OnTheDropper, it took until summer of 2021 when he discovered the best place for it!
Where is the fish when you need the clamp? In the landing net of course !!
So here you have a gadget that allows you to have the clamp where it does the most good:
On the landing net handle!!
Check this out:
https://www.youtube.com/watch?v=hmeBxnfCZfA&ab_channel=OlaAndersson
OnTheDropper MagneticDehooker
€9.90OnTheDropper MagneticDehooker
SKU: NFD9257
Getting the fish off the hook is usually done with a clamp, but a forcep can destroy the fly or twist the hook incorrectly.
This hook release tool works so that you slide it on your line then push it down towards the hook, press a little lightly whereupon the loose hook sticks to the magnet inside the tube and is thus prevented from getting stuck again while you pull it out.
This means that you can release even really deep-seated hooks that are impossible to get loose with the forcep.
Its made of plant-based plastic and wood!
Total length around 15cm.
OnTheDropper StrapMount
€5.90OnTheDropper StrapMount
SKU: NFD9250
Have you ever thought that one of the best place to hang gadgets & tools are on a belt?
Here’s the tool for it!
2-pack
OnTheDropper is a Swedish company with many smart product ideas helping fly fishers and fly tyers.
Products are manufactured using 3D printers and with 100% petroleum free plastics.
They only use plantbased plastics.
OnTheDropper SnapDry
€9.90OnTheDropper SnapDry
SKU: NFD9248
Most of us has very likely heard about the rubberband trick to dry your dry flies!?
Problem with rubberbands are that they do not survive too long in UV Light and most often too large for very small dry flies
This version is made with rubberbands much more tolerant against UV Light and it has a rubber band for larger flies and one for smaller flies.
Length: Approx. 15cm
OnTheDropper is a Swedish company with many smart product ideas helping fly fishers and fly tyers.
Products are manufactured using 3D printers and with 100% petroleum free plastics.
They only use plantbased plastics.
OnTheDropper FlexiSpoolStrap
From: €11.90OnTheDropper FlexiSpoolStrap
SKU: NFD9251
This is OnTheDroppers own version of Spool Straps!
It hold the tippet material perfectly in place and sticks straight out so its very easy and fast to get hold of the end of the nylon/flourcarbon!
Sold as 4pcs or 8pcs.
5mm wide
8 different colours
OnTheDropper is a Swedish company with many smart product ideas helping fly fishers and fly tyers.
Products are manufactured using 3D printers and with 100% petroleum free plastics.
They only use plantbased plastics.
OnTheDropper SpoolCaddy
€15.90OnTheDropper SpoolCaddy
SKU: NFD9247
This spool holder holds spools from basically all manufacturers and thanks to the different center sleeves that fit different spools with different diameters.
With these different centers you can get a rattle-free spool holder and with the spacers you can make the spools rotate individually.
But the big win is the knife that means you don’t have to use the nipper to cut the tippet material, you pull out and cut in one movement!
OnTheDropper is a Swedish company with many smart product ideas helping fly fishers and fly tyers.
Products are manufactured using 3D printers and with 100% petroleum free plastics.
They only use plantbased plastics.
OnTheDropper BoltOnBlade
€6.90OnTheDropper BoltOnBlade
SKU: NFD9245
BoltOnBlade:
The blade holder from SpoolCaddy fixed in a variant that you screw directly onto the spool/spools.
For those of you who want your tippet material in your pockets/bag/vest and not have it hanging on the outside.
You adapt the BoltOn variant to the number of spools you want, the middle rod is 40mm, which means you can fit up to 4 tippet spools
The center bar is easily cut with a knife and the included spacers ensure a good fit.
The blades are of the wallpaper knife variety (squared with 3 holes) that you can find in hardware stores.
A kit contains the following:
– 1x Blade holder with blade, reversible 3 times, a total of 4 cutting surfaces, enough for at least 2 seasons)
– Spacers 5x 8mm (Hanak indicator material etc.) and 5x 15mm (Trouthunter/Hanak/Stroft etc.) in several lengths.
– Screw and extra screw (T10) to screw the kit together.
OnTheDropper is a Swedish company with many smart product ideas helping fly fishers and fly tyers.
Products are manufactured using 3D printers and with 100% petroleum free plastics.
They only use plantbased plastics.
OnTheDropper 12thRing
€4.90OnTheDropper 12thRing
SKU: NFD9249
When Euro Nymphing you often wish you had a line loop right in front of the handle so you let go of that pendant that can be between the handle and the first fixed line loop, just like when you lay out and happen to lose grip on the line / paw and but have to chase it out half a meter ahead.
For this reason, OnTheDropper developed this gadget which is called “12thRing”
You clamp it to the rod as shown in the picture and pull it where you want it to achieve the desired effect.
This product also useful when sea & lake fishing when you handtwist in long lines!
OnTheDropper is a Swedish company with many smart product ideas helping fly fishers and fly tyers.
Products are manufactured using 3D printers and with 100% petroleum free plastics.
They only use plantbased plastics.
3pcs per pack
OnTheDropper FullView
€11.90OnTheDropper FullView
SKU: NFD9246
OnTheDropper is a Swedish company with many smart product ideas helping fly fishers and fly tyers.
Products are manufactured using 3D printers and with 100% petroleum free plastics.
They only use plantbased plastics.
Greasy & Dirty sunglasses is not fun!
This little thing have the polishing cloth to go inside a protective cover.
Attach it on a pin-on-reel from Dr. Slick for fast and easy access
OnTheDropper EcoWheel
€10.90OnTheDropper EcoWheel
SKU: NFD9253
OnTheDropper is a Swedish company with many smart product ideas helping fly fishers and fly tyers.
Products are manufactured using 3D printers and with 100% petroleum free plastics.
They only use plantbased plastics.
Ecowheel is a tool that collects longer pieces of tippet material by making a loop on the piece to be stored, inserting a part into the opening and rotating the inner part.
EcoWheel is the first “one-handed” operated tool, unlike the monometer, for example, which requires using both hands to spin the line.
Check this video
OnTheDropper TippetKnob
€11.90OnTheDropper TippetKnob
SKU: NFD9262
OnTheDropper is a Swedish company with many smart product ideas helping fly fishers and fly tyers.
Products are manufactured using 3D printers and with 100% petroleum free plastics.
They only use plantbased plastics.
There are few things that are as irritating as when you tackle up and just cannot get the leader out from the reel.
With this little genius product there’s no more irritating moments!
5pcs per pack!