Recently viewed products
-
Dr. Slick PSA75(B)RX Squall Plier 7,5”. Alu frame. T.C. Cutters
€85.00Select options This product has multiple variants. The options may be chosen on the product pageDr. Slick PSA75(B)RX Squall Plier 7,5”. Alu frame. T.C. Cutters
SKU: NFD799- Half Smooth, Half Striated Jaw Structure
- Anvil Tungsten Carbide Side Cutters
- Anodozed Aluminum
- Non-slip Rubber Grips
- 7.5 Inches
- Full-Swivel Coiled Lanyard, Clip-On Molded Holster, Replacement Cutters with Jaws and Hex Key Included
- Black or Green&Gold
-
Monic Striper Elite Intermediate Lines
€129.00Select options This product has multiple variants. The options may be chosen on the product pageMonic Striper Elite Intermediate Lines
SKU: NFD9272Targeted for Striper, Sea Bass and other species where you need a cold water salt line with some power to it!
Weight Forward – Intermediate sink 1.5-2ips
The two different heads (Long and Short) has been designed with density compensation, meaning as you move up the front taper and into the belly, the line becomes gradually less dense. This puts the very tip of your fly line the deepest in the water column, improving strike detection, and keeping the belly portion out of the fishing zone.
There’s a slight color change in this line, as the front head is colored with a muted blue that will still be unobtrusive and not stand out in the water, with the rear taper and running line transition into a greyish/black color.
Taper: See two taper drawings in the photo’s
Weights:
Long #8: Head tbc g – Belly tbc g
Long #9: Head tbc g – Belly tbc g
Long #10: Head tbc g – Belly tbc g
Short #8: Head tbc g – Belly tbc g
Short #9: Head tbc g – Belly tbc g
Short #10: Head tbc g – Belly tbc gCore: Monic’s new semi-stiff low-stretch saltwater core
Ideal Temp Range: +1C & Above, but works ok although a bit stiffer at lower temperatures
Loops: Reinforced Welded Loops On Both Ends -
Umpqua Perform X PIKE Leader w/Tyger Wire Tip
€21.99Add to cartUmpqua Perform X Pike Leader w/Tyger Wire Tip
SKU: NFD9389When Umpqua set out to make the absolute best leader for Pike and Muskie, there was only one choice….. TyGer wire.
TyGer wire allows any favorite knot to be easily tied. This leader has 6 feet of hard nylon connected to 18” of 30 lb TyGer wire tippet with a hand tied Albright knot.Length: 8ft
Breaking strength: 30lb / 14kg -
Galvan Torque Reels
From: €559.00Select options This product has multiple variants. The options may be chosen on the product pageGalvan Torque Reels
SKU: NFD9315The Torque is the most popular series of reels from Galvan (California, USA) which is, like all Galvan reels manufactured in America!
As the premier reel in the Galvan range, the Torque Series reels represent the culmination of a lifetime of fly-fishing and passion for reel design. Simply stated, it represents the very best of modern fly reel architecture. The Torque reel series was created because Boni wanted to create a revolutionary reel with a more substantial drag system than was presently available on the market. And it had to be sexy. Thus the Torque series reels were born.
The unique Torque reel, the fourth series created by Boni, was the first reel released with our Torque drag system, which is now employed in all of our reels. Its inception was in late 2002 with prototypes coming to life in 2003. After being tested, retested and modified, it was finally released to the public in 2004. It immediately won the 2004 Editor’s Choice in Fly Fish America and was ranked #3 in the recent Yellowstone Angler’s 8-wt reel shootout, beating a host of other reels in function and price (link). Its original style and unique porting has solidified Galvan’s reputation as a leading innovator in the industry.
The visually striking appearance of the Torque reels is a result of the unique cut-outs on the frame, spool, drag knob and reel foot. This design is not only aesthetic but also structural as it significantly reduces the weight of the reel while maintaining strength and increasing rigidity .The rounded rims on both spool and frame enhance durability to better withstand impact during extreme angling conditions.
At first glance, the hand is drawn to the reel and from the first crank of the contoured counter balanced spool, the reel’s quality is apparent. It is a combination of efficiency and simplicity driven by function. In this case, less is more and cost is no exception as Torque reels retail at half the price of reels in its class.
Torque Series reels are saltwater safe and will perform flawlessly under the harshest conditions. From remote alpine lakes to the saltwater flats, the highly ventilated spool and frame balance nicely with the lightest of today’s fly rods yet still compliment a modern big-game saltwater fly rod. The Torque is tough as nails and skillfully marries the technology of the future with the tradition of the past.
Included Galvan Technologies:
6061
EZ Grip
L.A.D.
low – COF
Maximum Porting
microTune
PBR
Torque Drag System
TruBalance
T²
ЯRetrieveAvailable in Black, Clear, Green, Blue, Burnt-Orange colours
NEW Limited Edition Colour: GUN METAL (Size 4,5,6 only) See NFD9313 G.E.N reel for exact colour!
Available in sizes 3, 4, 5, 6, 7, 8, 9, 10 and 12 and with these reel diameters and weights:
Torque Model Size Diameter in inches Weight in grams Torque T-3 3 3,000 119 Torque T-4 4 3,250 128 Torque T-5 5 3,500 136 Torque T-6 6 3,750 147 Torque T-7 7 3,875 179 Torque T-8 8 4,000 215 Torque T-9 9 4,125 227 Torque T-10 10 4,250 232 Torque T-12 12 4,500 244 -
Galvan The Grip Reels
From: €739.00Select options This product has multiple variants. The options may be chosen on the product pageGalvan The Grip Reels
SKU: NFD9316The Grip is the Saltwater dedicated reel from Galvan (California, USA) which is, like all Galvan reels manufactured in America!
Grip fly reels are designed for those that desire a fully sealed drag system for the most extreme conditions. They have the same heavy duty, clean cut construction that Torque and Rush series reels have become known for, only with a few sweet additions.
To start, 2 Hybrid ceramic ball bearings and even more carbon fiber have been incorporated, adding to the silky smooth drag that all Galvan users are accustomed to. A watertight, easy to access hub has also been added encasing the entire drag system, leaving only anodized aluminum exposed to the elements. The new quick turn knob allows for a super quick spool release as well as easy access to the Drag System, and the Monster grip handle provides assured accessibility.
Included Galvan Technologies:
6061
EZ Grip
L.A.D.
low – COF
Maximum Porting
microTune
Water Lock Hub
PBR
Torque Drag System
TruBalance
T²
ЯRetrieveAvailable in Black, Clear, Green, Blue, Burnt-Orange colours
Available in sizes 5,6,7,8, 10 and 12 and with these reel diameters and weights:Grip Model Size Diameter in inches Weight in grams The Grip G-5 5 3,50 172 The Grip G-6 6 3,75 179 The Grip G-7 7 3,88 189 The Grip G-8 8 4,00 232 The Grip G-10 10 4,25 247 The Grip G-12 12 4,50 269