Miss Mayfly MOXIE Women’s Wading Boots
€259.00
Miss Mayfly MOXIE Women’s Wading Boots
SKU: NFD9243
Description: Miss Mayfly’s women’s specific fit balances comfort and performance in our lightweight wading boot designed for comfortable hiking & wading. Featuring neoprene ankle padding, perfectly shaped to provide heel stability, coupled with full foam arch supports that together, give your feet the support and pampering they need for an epic day on the water.
Miss Mayfly’s seriously grippy rubber sole easily allows you to negotiate slick and unsteady river beds. And if you need a little extra grip, cleats are available to purchase separately.
- Durable waterproof synthetic leather upper
- Full Foam arch support insole for ultimate support & comfort
- A women’s specific fit and design balances comfort and performance
- Lightweight design for easy hiking, wading, and less fatigue
- Sticky rubber sole for maximum grip
- High density rubber outsole
- Locking quick laces that stay in place all day
- Padded gusseted tongue
- Scratch resistant rand at toe, heel and sides
- Molded rubber toe guards
- Molded cleat sites – Miss Mayfly Cleats are sold separately. Boot may be worn with or without cleats.
Rubber or Felt sole
Color: Sage
Available in women’s size 6, 7, 8, 9, 10, 11 translating to EU sizes 36,5 – 37,5 – 39 – 40 – 41,5 – 42,5
Room for insulated socks and neoprene booties has been added into the sizing for this product.
Order standard shoe size. For half size or extra width, round up to the next size.
12 Month Limited Warranty: Miss Mayfly branded wading gear products are guaranteed from factory defect for 12 months after date of purchase. If deemed defective, we will either replace or repair your wading product.
- Guarantee Exceptions: Guarantee does not cover: 1) Damage caused by improper use or care. 2) Fabric tears or damages incurred after purchase.
Repairs: Minor consumer damages may be repaired for a minimal fee which will be disclosed after review of product.
Payment for repairs or shipping charges: Customer services will contact you by email or phone to disclose fees and collect any payments due for non-covered repairs and/or shipping fees.
Sole_Colour_US Size | Rubber_Sage_6, Rubber_Sage_7, Rubber_Sage_8, Rubber_Sage_9, Rubber_Sage_10, Rubber_Sage_11, Felt_Sage_6, Felt_Sage_7, Felt_Sage_8, Felt_Sage_9, Felt_Sage_10, Felt_Sage_11 |
---|
Recently viewed products
-
Monic Henley Clear Phantom Tip Line
€89.00Select optionsMonic Henley Clear Phantom Tip Line
SKU: NFD350Weight Forward Floating 5-12 Wt
Freshwater & Saltwater
Taper: Traditional
Core: MoniCORE Proprietary Monofilament
Ideal Temp Range: +7C & above
Weight: Half-Size Above AFFTA Standard (see weight chart below)
Loops: Reinforced Welded Loops on Both Ends
Head Length: 10,7m
Breaking strength: 30lb
Head Weight:
#5 13,9g
#6 15,2g
#7 18,1g
#8 20,4g
#9 22,7g
#10 29,7g
#11 31,1g
#12 33,0g -
Iwana Special Reel Feet for Vintage Rods
€59.00Add to cartIwana Special Reel Feet for Vintage Rods
SKU: NFD9282- For each order, we offer two sizes. One is shorter and thinner than IWANA’s standard reel foot, and the other is shortest and thinnest.
- In our tests, they perfectly match most vintage fly rods.
- We provide additional screws for replacement.
- This reel foot can only be used on the IWANA reel.
- The thinnest reel foot is very thin to allow for extreme conditions. Do not lock or squeeze with excessive force as it may cause deformation.
-
Zen Tenkara Rod Tie Downs
€11.90Add to cartZen Tenkara Rod Tie Downs
SKU: NFD9287- Holds up to 4 standard tenkara rod tubes or 9 in sock only
- Holds up to 4 standard fly rods out of hard tubes
- Bundles multiple rods to keep them safe and together
- Tightens and loosen with one hand
- Perfect for cyclists, motorcyclists, hikers, campers, kayakers and rafters
- Allows you to strap down your rods in a fast and easy way
- 4 mm high density foam prevents scratches on fishing rods
- They float if they fall in the water
-
Dr. Slick Cyclone Nipper NATC / NATCO Gold and Green Aluminum Frame
€30.90Select optionsDr. Slick Cyclone Nipper NATC / NATCO Gold and Green Aluminum Frame
SKU: NFD9324Cyclone Nippers
Cutting edge nippers for the new age tippet materials. Super sharp Tungsten Carbide blades are
mounted on a lightweight 6061-T6 anodized aluminum frame and make short work of most, if not
all, tippet material from braid up to 20lb coated wire.
Available in straight or offset cutting face and both units come with replacement T.C. cutters,
screws, hex key, and a steel retention ring.Length: 57mm
Weight: 22gram -
Galvan The Grip Reels
€739.00 – €999.00Select optionsGalvan The Grip Reels
SKU: NFD9316The Grip is the Saltwater dedicated reel from Galvan (California, USA) which is, like all Galvan reels manufactured in America!
Grip fly reels are designed for those that desire a fully sealed drag system for the most extreme conditions. They have the same heavy duty, clean cut construction that Torque and Rush series reels have become known for, only with a few sweet additions.
To start, 2 Hybrid ceramic ball bearings and even more carbon fiber have been incorporated, adding to the silky smooth drag that all Galvan users are accustomed to. A watertight, easy to access hub has also been added encasing the entire drag system, leaving only anodized aluminum exposed to the elements. The new quick turn knob allows for a super quick spool release as well as easy access to the Drag System, and the Monster grip handle provides assured accessibility.
Included Galvan Technologies:
6061
EZ Grip
L.A.D.
low – COF
Maximum Porting
microTune
Water Lock Hub
PBR
Torque Drag System
TruBalance
T²
ЯRetrieveAvailable in Black, Clear, Green, Blue, Burnt-Orange colours
Available in sizes 5,6,7,8, 10 and 12 and with these reel diameters and weights:Grip Model Size Diameter in inches Weight in grams The Grip G-5 5 3,50 172 The Grip G-6 6 3,75 179 The Grip G-7 7 3,88 189 The Grip G-8 8 4,00 232 The Grip G-10 10 4,25 247 The Grip G-12 12 4,50 269 -
Galvan G.E.N Weight Kit
€25.90Add to cartGalvan G.E.N Weight Kit
SKU: NFD9351The G.E.N Weight Kit is a 1/2 ounce brass washer that fits into the spool of the G.E.N reels, allowing the angler to increase the weight of the reel by a 1/2 ounce. A rubber gasket is recessed into a groove in the washer’s hole ensuring a snug fit on the spindle. A threaded hole in the weight allows for easy removal of the weight from a reel using the included weight removal tool. (See instructions here) G.E.N Weight Kits come with one 1/2 ounce weight and includes the weight removal tool.