Beulah Spey 1327 G2 Platinum 
Dr. Slick Squall Plier, 7-1/2″, Aluminum Frame, Green & Gold, w/ TC Cutters, Black Coated Steel Jaws, Rubber Grips, Straight S (Comes with replacement Cutters and Jaws)
€84.90
Dr. Slick Squall Plier, 7-1/2″, Aluminum Frame, Green & Gold, w/ TC Cutters, Black Coated Steel Jaws, Rubber Grips, Straight S (Comes with replacement Cutters and Jaws)
SKU: NFD799-PSA75RX
- Half Smooth, Half Striated Jaw Structure
- Anvil Tungsten Carbide Side Cutters
- Anodozed Aluminum
- Non-slip Rubber Grips
- 7.5 Inches
- Full-Swivel Coiled Lanyard, Clip-On Molded Holster, Replacement Cutters with Jaws and Hex Key Included
10 in stock (can be backordered)
Designed with HR 70+ anvil tungsten carbide side cutters, these T.C. cutters make short work of any monofilament and excel at cutting the new-age braid and synthetic lines. Can cut wire up to 60lbs. Jaws are made from heat treated SUS420 J2 coated stainless steel with a HR of 52. Frame is made from 6061-T6 anodized aluminum to withstand salt water, and is equipped with non-slip rubber grips and a self-opening spring. The most versatile plier in our arsenal.
| Colour | Satin, Black, Prism |
|---|
Recently viewed products
-
Umpqua ZS2 Net Quiver
€59.00Add to cartUmpqua ZS2 Net Quiver
SKU: NGD9375A perfect addition to ZS2 Wader Belt, it just as easily attaches to both Umpqua’s Ledges ZS2 500 and 650. Reinforced web loops with “Natick” snaps and Velcro back ensure secure attachment to any belt. Well-padded holster with ballistic nylon fabric for long-term durability.
-
Taylor Series-1 Full Frame Reels
€419.00Select optionsTaylor Series-1 Full Frame Reels
SKU: NFD9216– Multiple standard colors (Slate Grey, Golden Olive, Ruby Red, Offshore Blue)
FULL FRAME Construction!– Watertight sealed drag system (salt-water safe)
– Hard anodized exterior for both beauty and protection
– Carbon-fiber drag system
– Highly ported yet ridged frame design
– Ultra large arbor design for fast retrieve and minimal line coil
– Cold-Forged and machined from aerospace 6061 T6 Aluminum
– Reel clicks on both incoming and outgoing
– Convertible to both left and right hand retrieve
– Reels come in a tough neoprene case- Two-tone anodized reel frameOne size: wt4-6: 136 grams and 95mm diameter
-
OnTheDropper Rod Balancing Kit
€21.90Add to cartOnTheDropper Rod Balancing Kit
SKU: NFD9256A front heavy rod is no good!
To find a reel that give you the right balance can be expensive and seldom fully accurate. With this balancing kit you can easily achieve balance in the rod as you can change the weight very precisely with the help of discs that are hidden inside the balancer.
IMPORTANT: Before ordering, you must measure the diameter end of the reel seat so that it matches. -
Taylor Series-1 Reels
€389.00 – €409.00Select optionsTaylor Series-1 Reels
SKU: NFD700– Multiple standard colors (Slate Grey, Golden Olive, Ruby Red, Offshore Blue)
– Watertight sealed drag system (salt-water safe)
– Hard anodized exterior for both beauty and protection
– Carbon-fiber drag system
– Highly ported yet ridged frame design
– Ultra large arbor design for fast retrieve and minimal line coil.
– Cold-Forged and machined from aerospace 6061 T6 Aluminum
– Reel clicks on both incoming and outgoing
– Convertible to both left and right hand retrieve
– Reels come in a tough neoprene case- Two-tone anodized reel frame
Two sizes:
wt4-6: 136 grams and 95mm diameter
wt7-9: 147 grams and 106mm diameter (NFD recommends this one for wt 6-8)
-
Umpqua ZS2 Wader Chest Pack Olive
€93.00Add to cartUmpqua ZS2 Wader Chest Pack Olive
SKU: NFD9361Once you clip this to your wader harness, you will have everything you need at your fingertips. This little chest pack handles two standard fly boxes along with all of the standard ZeroSweep™ features. One ZeroSweep™ retractor station (great for nipper and floatant attachment), ambidextrous hemostat station, foam fly patch and tippet holder cover all your key accessories. ZS2 version now includes a molle modular attachment station allowing integration with ZS2 accessories.
FEATURES
• 2 x ZS™ Retractor Stations – with hypalon attachment bands
• 2 x ZS™ Hemostat Grab Tabs – ambidextrous
• 1 x ZS™ Foam Fly Patch Station – includes foam fly patch
• 1 x ZS™ Cord Tippet Holder – “Stowable” when not in use
• 1 x Stretch Mesh Pocket – great for floatant
• Attaches to any belt or rail for instant ZeroSweep work-station
• Integrates seamlessly with ZeroSweep Wader Belt
• 1 x Molle Modular Attachment Station – compatible with the following ZS2 accessories (sold separately):
1. ZS2 Foam Fly Patch
2. ZS2 Gel Floatant Holder
3. ZS2 Shimi Shake Floatant Holder
4. ZS2 Tippet Holder
• Closed-foot zipper sliders (minimize line-snag)
• YKK Zippers
• Fabric:
Body Fabric – 420 Denier Nylon
High Wear Locations – Ballistic Nylon
