European Distributor of High Quality Fly Fishing Products
0 items€0.00

No products in the cart.

Category: Lines & more

Lines & more

Showing 25–32 of 69 results

  • Monic Saltwater Master – Bonefish
    SKU: NFD495

    Specialized Tropical Saltwater line for Bonefish!

    Colour: Sandy beige/yellow

    Weights: 7, 8 and 9

    Head Length: 14m
    Head Weight:
    #7  21,2g
    #8  24,4g
    #9  26,0g

    Select options
  • Monic Saltwater Master – Permit
    SKU: NFD516

    Specialized Tropical Saltwater line for Permit!

    Colour: White

    Weights: 8, 9 and 10

    Head Length: 15,0m
    Head Weight:
    #8  23,5g
    #9  28,6g
    #10 32,6g

    Select options
  • Monic Skyline Plus Line
    SKU: NFD365

    Weight Forward Floating 4-12 wt

    Tropical Saltwater Line

    Taper: Javelin

    Core: Zero-Stretch GSP Core

    Ideal Temp Range: +10C & Above

    Weight: Half Size Above AFFTA Standard (see weight chart below)

    Loops: Reinforced Welded Loops on Both Ends
    Breaking strengths: 35lb for 4-6wt,  55lb for 7-9wt and 65lb for 10-12wt
    Head Length: 11m
    Head Weight:
    #4  10,5g
    #5  12,2g
    #6  13,2g
    #7  16,2g
    #8  18,8g
    #9  20,6g
    #10 22,5g
    #11 28,0g
    #12 29,5g

    Select options
  • Monic Striper Elite Intermediate Lines
    SKU: NFD9272

    Targeted for Striper, Sea Bass and other species where you need a cold water salt line with some power to it!

    Weight Forward – Intermediate sink 1.5-2ips

    The two different heads (Long and Short) has been designed with density compensation, meaning as you move up the front taper and into the belly, the line becomes gradually less dense. This puts the very tip of your fly line the deepest in the water column, improving strike detection, and keeping the belly portion out of the fishing zone.

    There’s a slight color change in this line, as the front head is colored with a muted blue that will still be unobtrusive and not stand out in the water, with the rear taper and running line transition into a greyish/black color.

    Taper: See two taper drawings in the photo’s

    Weights:
    Long #8:   Head tbc g –  Belly tbc g
    Long #9:   Head tbc g –  Belly tbc g
    Long #10: Head tbc g –  Belly tbc g
    Short #8:   Head tbc g –  Belly tbc g
    Short #9:   Head tbc g –  Belly tbc g
    Short #10: Head tbc g –  Belly tbc g

    Core: Monic’s new semi-stiff low-stretch saltwater core
    Ideal Temp Range: +1C & Above, but works ok although a bit stiffer at lower temperatures
    Loops: Reinforced Welded Loops On Both Ends

    Select options
  • Monic STS Running line
    SKU: NFD376

    30,5 meter Level Diameter Running Line

    Freshwater & Saltwater

    Core: Low-Moderate Stretch Braided Fiber

    0,86mm diameter

    30lb breaking strength

    Ideal Temp Range: +48C & Below

    Loops: Reinforced Welded Loops on Both Ends

    Select options
  • Monic Trout Master Line
    SKU: NFD9273

    A floating fly line with a new taper for easy casting also at very short distances as well as for that rising trout almost out of reach!

    Core: Monic’s supple and relaxed braided fiber core
    Colour: Each section of the line has its own colour
    Ideal Temp Range: Down to +1C
    Loops: Reinforced Welded Loops On Both Ends

    Select options
  • Monic WHIZ Leader
    SKU: NFD370

    A level leader without memory!

    9ft, 7lb
    9ft, 12lb
    9ft, 20lb
    12ft, 20lb

    Select options
  • OnTheDropper BoltOnBlade
    SKU: NFD9245

    BoltOnBlade:

    The blade holder from SpoolCaddy fixed in a variant that you screw directly onto the spool/spools.
    For those of you who want your tippet material in your pockets/bag/vest and not have it hanging on the outside.

    You adapt the BoltOn variant to the number of spools you want, the middle rod is 40mm, which means you can fit up to 4 tippet spools
    The center bar is easily cut with a knife and the included spacers ensure a good fit.
    The blades are of the wallpaper knife variety (squared with 3 holes) that you can find in hardware stores.

    A kit contains the following:

    – 1x Blade holder with blade, reversible 3 times, a total of 4 cutting surfaces, enough for at least 2 seasons)
    – Spacers 5x 8mm (Hanak indicator material etc.) and 5x 15mm (Trouthunter/Hanak/Stroft etc.) in several lengths.
    – Screw and extra screw (T10) to screw the kit together.

     

    OnTheDropper is a Swedish company with many smart product ideas helping fly fishers and fly tyers.
    Products are manufactured using 3D printers and with 100% petroleum free plastics.
    They only use plantbased plastics.

    Add to cart
NFD